BNTBD - VV-L-820 LUBRICATING OIL
- MSDS: BNTBD
- Manufacturer: STATE MACHINE PRODUCTS INC (OUT OF BUSUNESS)
- Product Name: VV-L-820 LUBRICATING OIL
- National Stock Number: 7360-00-187-4757
Product Identification
Product ID:VV-L-820 LUBRICATING OIL
MSDS Date:09/17/1992
FSC:7360
NIIN:00-187-4757
MSDS Number: BNTBD
Responsible Party
DRY RIDGE, KY 41035-9757
US
Info Phone: 804-279-4371 (DGSC-HMIS)
Preparer: HMIS TECHNICIAN
Cage: 18789
Contractor
Telephone: 606-823-5311
Cage: 18789
Ingredients
PETROLEUM BASE OIL (LUBRICATING OIL)
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE: MILD IRRITATION OF EYES,SKIN OR
RESPIRATORY TRACT. CHRONIC:IRRITATION OR DERMATITIS.
Effects of Overexposure:PROLONGED OR REPEATED SKIN CONTACT MAY CAUSE
MILD SKIN OR EYE IRRITATION.
Medical Cond Aggravated by Exposure:NO DATA AVAILABLE.
First Aid
First Aid:SKIN:WASH THOROUGHLY WITH SOAP & WARM WATER EYE:-FLUSH WITH
WATER FOR 15 MINUTES OR UNTIL IRRITATION SUBSIDES.
Fire Fighting
Flash Point Method:COC
Flash Point:320F/160C
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:FOAM,DRY CHEMICAL,CO2,OR WATE FOG OR SPRAY
Fire Fighting Procedures:KEEP EXPOSED CONTAINERS COOL WITH WATER SPRAY
Unusual Fire/Explosion Hazard:DO NOT MIX OR STORE WTH STONG OXIDANTS
LIKE LIQUID CHLORINE OR CONCENTRATED OXYGEN.
Accidental Release
Spill Release Procedures:RECOVER FREE LIQUID ADD ABSORBENT LIKE SAND OR
EARTH TO SPILL AREA. KEEP PETROLEUM PRODUCTS OUT OF SEWERS &
WATERWAYS. ADVISE AUTHORITIES IF PRODUCT HAS ENTERED OR MAY ENTER
SEWERS, WATERWAYS OR EXTEN SIVE LAND AREA.
Handling
Handling and Storage Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
DO NOT HANDLE OR STORE NEAR HEAT,SPARKS,FLAME OR STRONG OXIDANTS.
Other Precautions:AVOID BREATHING OIL MIST. REMOVE OIL SOAKED CLOTHING
AND LAUNDER PRIOR TO REUSE. DISCARE OIL SOAKED SHOES. WASH SKIN
THOROUGHLY.
Exposure Controls
Respiratory Protection:NONE SHOULD BE NEEDED. USE AIR SUPPLIED RESPIR
IN CONFINED SPACES.
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Work Hygienic Practices:WASH HANDS AFTER USE.
Supplemental Safety and Health
MSDS GENERATED BY HMIS TECHNICAIN SINCE MFR IS OUT OF BUSINESS. WAS
GENERATED FROM SIMILAR MATERIAL FROM ANOTHER MFR AND SPEC SHEET.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:504F/282C
Vapor Pres:<.1
Vapor Density:>11.0
Spec Gravity:0.9
Evaporation Rate & Reference:<0.01 (N-BUTYL-ACET=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:STRAW TO PALE AMBER COLORED LIQUID.SLIGHT HYD ODOR
Percent Volatiles by Volume:NEGL
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:SOURCES OF IGNITION
Hazardous Decomposition Products:OXIDES OF CARBON
Disposal
Waste Disposal Methods:DISPOSE OF ABSORBED MATERIAL AT AN APPROVED
MATERIAL AT AN APPROVED WASTE DISPOSAL SITE OR FACILITY IN
ACCORDANCE WITH LOCAL,STATE & FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.